Rogflys

I located the vent and leash plugs about 10 inches from the tail. The vent plug is designed to sit proud of the surface, I chose to counter sink it into the top deck. I drilled the holes for each plug (fortunately hit the blocking!!!!)
The tape is to ease cleanup of any dripped or sqeeze out of the epoxy.
After the epoxy set, the gloss coat was applied to both the top and bottom surfaces of the board. You can see the tape covering the plugs, I also had tape covering the finbox slot on the bottom.

All that is left is the final sanding and polishing!!!!!!!!!!

Posted by Roger at 10:41 AM